There are several ways to connect the fiber

There are three fiber-optic connections.

First, you can access them and insert the fiber optic connector socket. Connector to 10% to 20% loss of light, but it is easy to reconfigure the system.

Second, you can use mechanical means to bonding. Carefully cut the two methods is good on one end of a fiber-optic tube, and then clamp them. Optical fiber can be adjusted through the junction, so that the signal reaches the maximum. Mechanical combination of trained personnel needed to spend about 5 minutes to complete, the light loss is about 10%.

Third, the two optical fibers can be fused together to form a solid connection. Fusion to form a single optical fiber and fiber is almost the same, but also have a little decay. For the three connection methods, combined with reflection at all, and the reflected signal energy and the interaction.