The comprehensive wiring environmental requirements of ten

The comprehensive wiring environmental requirements have the following ten aspects:

(1) building ground level off, smooth, the height and width of the gate should comply with the design requirements.

(2) if the floor laid activities, the activities of the ground floor anti-static measures should comply with the design requirements.

(3) housing embedded trough, dark tube, holes and the position of the shaft well, the number, size all should comply with the design requirements.

(4) between the handover, equipment should be provided with between 220 V grounding protection single-phase power socket.

(5) between the equipment room, transfer shall provide reliable grounding device, grounding resistance and the device Settings should comply with the design requirements.

(6) between the equipment room, the handover position, area, height, ventilated, fire protection and the environment temperature and humidity should comply with the design requirements.

(7) introduced the method of laying cable should comply with the design requirements.

(8) and other facilities into pipe (such as electricity, water, gas, sewers, etc) position and spacing should comply with the design requirements.

(9) pipeline entrance parts should comply with the design requirements and should take drainage and prevent gas, water and vermin into measures.

(10) into line, the position of between area, height, lighting, power supply, grounding, fire prevention, waterproof should comply with the design requirements.

The comprehensive wiring environment not only to meet the requirements of the requirements, and the relevant equipment installation also should comply with the design requirements of the seismic documents.